مطلوب مفتاح API حتى تتم معالجة الطلبات بواسطة النظام. بمجرد قيام المستخدم بالتسجيل، يتم إنشاء مفتاح API تلقائيًا لهذا المستخدم. يجب إرسال مفتاح API مع كل طلب (انظر المثال الكامل أدناه). إذا لم يتم إرسال مفتاح API أو انتهت صلاحيته، فسيكون هناك خطأ. يرجى التأكد من الحفاظ على سر مفتاح API الخاص بك لمنع إساءة الاستخدام.
للمصادقة مع نظام واجهة برمجة التطبيقات (API)، يتعين عليك إرسال مفتاح واجهة برمجة التطبيقات (API) الخاص بك كرمز تفويض مميز مع كل طلب. يمكنك رؤية نموذج التعليمات البرمجية أدناه.
curl --location --request POST 'https://qxa.me/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \ $curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/account",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);var request = require('request');
var options = {
'method': 'POST',
'url': 'https://qxa.me/api/account',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: ''
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/account"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/account");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
تحتوي واجهة برمجة التطبيقات (API) لدينا على محدد للمعدل للحماية من الارتفاع الكبير في الطلبات لتحقيق أقصى قدر من الاستقرار. محدد السعر الخاص بنا محدد حاليًا بعدد 30 من الطلبات لكل 1 دقيقة. يرجى ملاحظة أن السعر قد يتغير وفقًا للخطة المشتركة.
سيتم إرسال عدة رؤوس إلى جانب الرد ويمكن فحصها لتحديد المعلومات المختلفة حول الطلب.
X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
يتم إرجاع جميع استجابات واجهة برمجة التطبيقات (API) بتنسيق JSON افتراضيًا. لتحويل ذلك إلى بيانات قابلة للاستخدام، يجب استخدام الوظيفة المناسبة وفقًا للغة. في PHP، يمكن استخدام الدالة json_decode() لتحويل البيانات إما إلى كائن (افتراضي) أو إلى مصفوفة (اضبط المعلمة الثانية على true). من المهم جدًا التحقق من مفتاح الخطأ لأنه يوفر معلومات حول ما إذا كان هناك خطأ أم لا. يمكنك أيضًا التحقق من رمز الرأس.
{
"error": 1,
"message": "An error occurred"
}https://qxa.me/api/account
To get information on the account, you can send a request to this endpoint and it will return data on the account.
curl --location --request GET 'https://qxa.me/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/account",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/account',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/account"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/account");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"data": {
"id": 1,
"email": "sample@domain.com",
"username": "sampleuser",
"avatar": "https:\/\/domain.com\/content\/avatar.png",
"status": "pro",
"expires": "2022-11-15 15:00:00",
"registered": "2020-11-10 18:01:43"
}
}https://qxa.me/api/account/update
To update information on the account, you can send a request to this endpoint and it will update data on the account.
curl --location --request PUT 'https://qxa.me/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"email": "newemail@google.com",
"password": "newpassword"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/account/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"email": "newemail@google.com",
"password": "newpassword"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://qxa.me/api/account/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"email": "newemail@google.com",
"password": "newpassword"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/account/update"
payload = {
"email": "newemail@google.com",
"password": "newpassword"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://qxa.me/api/account/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"email": "newemail@google.com",
"password": "newpassword"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Account has been successfully updated."
}https://qxa.me/api/campaigns?limit=2&page=1
To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).
| المعلمة | وصف |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://qxa.me/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/campaigns?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/campaigns?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/campaigns?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/campaigns?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"campaigns": [
{
"id": 1,
"name": "Sample Campaign",
"public": false,
"rotator": false,
"list": "https:\/\/domain.com\/u\/admin\/list-1"
},
{
"id": 2,
"domain": "Facebook Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/test",
"list": "https:\/\/domain.com\/u\/admin\/test-2"
}
]
}
}https://qxa.me/api/campaign/add
A campaign can be added using this endpoint.
| المعلمة | وصف |
|---|---|
| name | (optional) Campaign name |
| slug | (optional) Rotator Slug |
| public | (optional) Access |
curl --location --request POST 'https://qxa.me/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/campaign/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://qxa.me/api/campaign/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/campaign/add"
payload = {
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://qxa.me/api/campaign/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"domain": "New Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/new-campaign",
"list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}https://qxa.me/api/campaign/:campaignid/assign/:linkid
A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.
curl --location --request POST 'https://qxa.me/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/campaign/:campaignid/assign/:linkid",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://qxa.me/api/campaign/:campaignid/assign/:linkid',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/campaign/:campaignid/assign/:linkid"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://qxa.me/api/campaign/:campaignid/assign/:linkid");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Link successfully added to the campaign."
}https://qxa.me/api/campaign/:id/update
To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| المعلمة | وصف |
|---|---|
| name | (required) Campaign name |
| slug | (optional) Rotator Slug |
| public | (optional) Access |
curl --location --request PUT 'https://qxa.me/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/campaign/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://qxa.me/api/campaign/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/campaign/:id/update"
payload = {
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://qxa.me/api/campaign/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"domain": "Twitter Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/twitter-campaign",
"list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}https://qxa.me/api/campaign/:id/delete
To delete a campaign, you need to send a DELETE request.
curl --location --request DELETE 'https://qxa.me/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/campaign/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://qxa.me/api/campaign/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/campaign/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://qxa.me/api/campaign/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Campaign has been deleted successfully."
}https://qxa.me/api/channels?limit=2&page=1
To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).
| المعلمة | وصف |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://qxa.me/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/channels?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/channels?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/channels?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/channels?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"channels": [
{
"id": 1,
"name": "Channel 1",
"description": "Description of channel 1",
"color": "#000000",
"starred": true
},
{
"id": 2,
"name": "Channel 2",
"description": "Description of channel 2",
"color": "#FF0000",
"starred": false
}
]
}
}https://qxa.me/api/channel/:id?limit=1&page=1
To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).
| المعلمة | وصف |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://qxa.me/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/channel/:id?limit=1&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/channel/:id?limit=1&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/channel/:id?limit=1&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/channel/:id?limit=1&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"items": [
{
"type": "links",
"id": 1,
"title": "My Sample Link",
"preview": "https:\/\/google.com",
"link": "https:\/\/qxa.me\/google",
"date": "2022-05-12"
},
{
"type": "bio",
"id": 1,
"title": "My Sample Bio",
"preview": "https:\/\/qxa.me\/mybio",
"link": "https:\/\/qxa.me\/mybio",
"date": "2022-06-01"
}
]
}
}https://qxa.me/api/channel/add
A channel can be added using this endpoint.
| المعلمة | وصف |
|---|---|
| name | (required) Channel name |
| description | (optional) Channel description |
| color | (optional) Channel badge color (HEX) |
| starred | (optional) Star the channel or not (true or false) |
curl --location --request POST 'https://qxa.me/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/channel/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://qxa.me/api/channel/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/channel/add"
payload = {
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://qxa.me/api/channel/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}https://qxa.me/api/channel/:channelid/assign/:type/:itemid
An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.
| المعلمة | وصف |
|---|---|
| :channelid | (required) Channel ID |
| :type | (required) links or bio or qr |
| :itemid | (required) Item ID |
curl --location --request POST 'https://qxa.me/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/channel/:channelid/assign/:type/:itemid",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://qxa.me/api/channel/:channelid/assign/:type/:itemid',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/channel/:channelid/assign/:type/:itemid"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://qxa.me/api/channel/:channelid/assign/:type/:itemid");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Item successfully added to the channel."
}https://qxa.me/api/channel/:id/update
To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| المعلمة | وصف |
|---|---|
| name | (optional) Channel name |
| description | (optional) Channel description |
| color | (optional) Channel badge color (HEX) |
| starred | (optional) Star the channel or not (true or false) |
curl --location --request PUT 'https://qxa.me/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/channel/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://qxa.me/api/channel/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/channel/:id/update"
payload = {
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://qxa.me/api/channel/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Channel has been updated successfully."
}https://qxa.me/api/channel/:id/delete
To delete a channel, you need to send a DELETE request. All items will be unassigned as well.
curl --location --request DELETE 'https://qxa.me/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/channel/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://qxa.me/api/channel/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/channel/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://qxa.me/api/channel/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Channel has been deleted successfully."
}https://qxa.me/api/domains?limit=2&page=1
To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).
| المعلمة | وصف |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://qxa.me/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/domains?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/domains?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/domains?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/domains?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"domains": [
{
"id": 1,
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
},
{
"id": 2,
"domain": "https:\/\/domain2.com",
"redirectroot": "https:\/\/rootdomain2.com",
"redirect404": "https:\/\/rootdomain2.com\/404"
}
]
}
}https://qxa.me/api/domain/add
A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.
| المعلمة | وصف |
|---|---|
| domain | (required) Branded domain including http or https |
| redirectroot | (optional) Root redirect when someone visits your domain |
| redirect404 | (optional) Custom 404 redirect |
curl --location --request POST 'https://qxa.me/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/domain/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://qxa.me/api/domain/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/domain/add"
payload = {
"domain": "https://domain1.com",
"redirectroot": "https://rootdomain.com",
"redirect404": "https://rootdomain.com/404"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://qxa.me/api/domain/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 1
}https://qxa.me/api/domain/:id/update
To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| المعلمة | وصف |
|---|---|
| redirectroot | (optional) Root redirect when someone visits your domain |
| redirect404 | (optional) Custom 404 redirect |
curl --location --request PUT 'https://qxa.me/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/domain/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://qxa.me/api/domain/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/domain/:id/update"
payload = {
"redirectroot": "https://rootdomain-new.com",
"redirect404": "https://rootdomain-new.com/404"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://qxa.me/api/domain/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Domain has been updated successfully."
}https://qxa.me/api/domain/:id/delete
To delete a domain, you need to send a DELETE request.
curl --location --request DELETE 'https://qxa.me/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/domain/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://qxa.me/api/domain/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/domain/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://qxa.me/api/domain/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Domain has been deleted successfully."
}https://qxa.me/api/splash?limit=2&page=1
To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).
| المعلمة | وصف |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://qxa.me/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/splash?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/splash?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/splash?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/splash?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"splash": [
{
"id": 1,
"name": "Product 1 Promo",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"name": "Product 2 Promo",
"date": "2020-11-10 18:10:00"
}
]
}
}https://qxa.me/api/pixels?limit=2&page=1
To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).
| المعلمة | وصف |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://qxa.me/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/pixels?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/pixels?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/pixels?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/pixels?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"pixels": [
{
"id": 1,
"type": "gtmpixel",
"name": "GTM Pixel",
"tag": "GA-123456789",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"type": "twitterpixel",
"name": "Twitter Pixel",
"tag": "1234567",
"date": "2020-11-10 18:10:00"
}
]
}
}https://qxa.me/api/pixel/add
A pixel can be created using this endpoint. You need to send the pixel type and the tag.
| المعلمة | وصف |
|---|---|
| type | (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok |
| name | (required) Custom name for your pixel |
| tag | (required) The tag for the pixel |
curl --location --request POST 'https://qxa.me/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/pixel/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://qxa.me/api/pixel/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/pixel/add"
payload = {
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://qxa.me/api/pixel/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 1
}https://qxa.me/api/pixel/:id/update
To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| المعلمة | وصف |
|---|---|
| name | (optional) Custom name for your pixel |
| tag | (required) The tag for the pixel |
curl --location --request PUT 'https://qxa.me/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "My GTM",
"tag": "GTM-ABCDE"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/pixel/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"name": "My GTM",
"tag": "GTM-ABCDE"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://qxa.me/api/pixel/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "My GTM",
"tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/pixel/:id/update"
payload = {
"name": "My GTM",
"tag": "GTM-ABCDE"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://qxa.me/api/pixel/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"name": "My GTM",
"tag": "GTM-ABCDE"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Pixel has been updated successfully."
}https://qxa.me/api/pixel/:id/delete
To delete a pixel, you need to send a DELETE request.
curl --location --request DELETE 'https://qxa.me/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/pixel/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://qxa.me/api/pixel/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/pixel/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://qxa.me/api/pixel/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Pixel has been deleted successfully."
}https://qxa.me/api/overlay?limit=2&page=1
To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).
| المعلمة | وصف |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://qxa.me/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/overlay?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/overlay?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/overlay?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/overlay?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"cta": [
{
"id": 1,
"type": "message",
"name": "Product 1 Promo",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"type": "contact",
"name": "Contact Page",
"date": "2020-11-10 18:10:00"
}
]
}
}https://qxa.me/api/qr?limit=2&page=1
To get your QR codes via the API, you can use this endpoint. You can also filter data (See table for more info).
| المعلمة | وصف |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
curl --location --request GET 'https://qxa.me/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/qr?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/qr?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/qr?limit=2&page=1"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/qr?limit=2&page=1");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"qrs": [
{
"id": 2,
"link": "https:\/\/qxa.me\/qr\/a2d5e",
"scans": 0,
"name": "Google",
"date": "2020-11-10 18:01:43"
},
{
"id": 1,
"link": "https:\/\/qxa.me\/qr\/b9edfe",
"scans": 5,
"name": "Google Canada",
"date": "2020-11-10 18:00:25"
}
]
}
}https://qxa.me/api/qr/:id
To get details for a single QR code via the API, you can use this endpoint.
curl --location --request GET 'https://qxa.me/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/qr/:id",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/qr/:id',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/qr/:id"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/qr/:id");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"details": {
"id": 1,
"link": "https:\/\/qxa.me\/qr\/b9edfe",
"scans": 5,
"name": "Google Canada",
"date": "2020-11-10 18:00:25"
},
"data": {
"clicks": 1,
"uniqueClicks": 1,
"topCountries": {
"Unknown": "1"
},
"topReferrers": {
"Direct, email and other": "1"
},
"topBrowsers": {
"Chrome": "1"
},
"topOs": {
"Windows 10": "1"
},
"socialCount": {
"facebook": 0,
"twitter": 0,
"instagram": 0
}
}
}https://qxa.me/api/qr/add
To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| المعلمة | وصف |
|---|---|
| type | (required) text | vcard | link | email | phone | sms | wifi |
| data | (required) Data to be embedded inside the QR code. The data can be string or array depending on the type |
| background | (optional) RGB color e.g. rgb(255,255,255) |
| foreground | (optional) RGB color e.g. rgb(0,0,0) |
| logo | (optional) Path to the logo either png or jpg |
curl --location --request POST 'https://qxa.me/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/qr/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://qxa.me/api/qr/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/qr/add"
payload = {
"type": "link",
"data": "https://google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https://site.com/logo.png"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://qxa.me/api/qr/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"link": "https:\/\/qxa.me\/qr\/a58f79"
}https://qxa.me/api/qr/:id/update
To update a QR Code, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| المعلمة | وصف |
|---|---|
| data | (required) Data to be embedded inside the QR code. The data can be string or array depending on the type |
| background | (optional) RGB color e.g. rgb(255,255,255) |
| foreground | (optional) RGB color e.g. rgb(0,0,0) |
| logo | (optional) Path to the logo either png or jpg |
curl --location --request PUT 'https://qxa.me/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/qr/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://qxa.me/api/qr/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/qr/:id/update"
payload = {
"type": "link",
"data": "https://google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https://site.com/logo.png"
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://qxa.me/api/qr/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "QR has been updated successfully."
}https://qxa.me/api/qr/:id/delete
To delete a QR code, you need to send a DELETE request.
curl --location --request DELETE 'https://qxa.me/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/qr/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://qxa.me/api/qr/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/qr/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://qxa.me/api/qr/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "QR Code has been deleted successfully."
}https://qxa.me/api/urls?limit=2&page=1&order=date
To get your links via the API, you can use this endpoint. You can also filter data (See table for more info).
| المعلمة | وصف |
|---|---|
| limit | (optional) Per page data result |
| page | (optional) Current page request |
| order | (optional) Sort data between date or click |
| short | (optional) Search using the short url. Note that when you use the short parameter, all other parameters are ignored and if there is a match a Single Link response will be returned. |
| q | (optional) Search for links using a keyword |
curl --location --request GET 'https://qxa.me/api/urls?limit=2&page=1&order=date' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/urls?limit=2&page=1&order=date",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/urls?limit=2&page=1&order=date',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/urls?limit=2&page=1&order=date"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/urls?limit=2&page=1&order=date");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"urls": [
{
"id": 2,
"alias": "google",
"shorturl": "https:\/\/qxa.me\/google",
"longurl": "https:\/\/google.com",
"clicks": 0,
"title": "Google",
"description": "",
"date": "2020-11-10 18:01:43"
},
{
"id": 1,
"alias": "googlecanada",
"shorturl": "https:\/\/qxa.me\/googlecanada",
"longurl": "https:\/\/google.ca",
"clicks": 0,
"title": "Google Canada",
"description": "",
"date": "2020-11-10 18:00:25"
}
]
}
}https://qxa.me/api/url/:id
To get details for a single link via the API, you can use this endpoint.
curl --location --request GET 'https://qxa.me/api/url/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/url/:id",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'GET',
'url': 'https://qxa.me/api/url/:id',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/url/:id"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("GET", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Get, "https://qxa.me/api/url/:id");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 1,
"details": {
"id": 1,
"shorturl": "https:\/\/qxa.me\/googlecanada",
"longurl": "https:\/\/google.com",
"title": "Google",
"description": "",
"location": {
"canada": "https:\/\/google.ca",
"united states": "https:\/\/google.us"
},
"device": {
"iphone": "https:\/\/google.com",
"android": "https:\/\/google.com"
},
"expiry": null,
"date": "2020-11-10 18:01:43"
},
"data": {
"clicks": 0,
"uniqueClicks": 0,
"topCountries": 0,
"topReferrers": 0,
"topBrowsers": 0,
"topOs": 0,
"socialCount": {
"facebook": 0,
"twitter": 0,
"google": 0
}
}
}https://qxa.me/api/url/add
To shorten a link, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| المعلمة | وصف |
|---|---|
| url | (required) Long URL to shorten. |
| custom | (optional) Custom alias instead of random alias. |
| type | (optional) Redirection type [direct, frame, splash], only id for custom splash page or overlay-id for cta pages |
| password | (optional) Password protection |
| domain | (optional) Custom Domain |
| expiry | (optional) Expiration for the link example 2021-09-28 23:11:16 |
| geotarget | (optional) Geo targeting data |
| devicetarget | (optional) Device targeting data |
| languagetarget | (optional) Language targeting data |
| metatitle | (optional) Meta title |
| metadescription | (optional) Meta description |
| metaimage | (optional) Link to a jpg or png image |
| description | (optional) Note or description |
| pixels | (optional) Array of pixel ids |
| channel | (optional) Channel ID |
| campaign | (optional) Campaign ID |
| deeplink | (optional) Object containing app store links. When using this, it is important to set device targeting as well. (New) You can now set the parameter "auto" to true to automatically generate the deep links from provided long link. |
| status | (optional) public or private (default) |
curl --location --request POST 'https://qxa.me/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"url": "https:\/\/google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/url/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"url": "https:\/\/google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'POST',
'url': 'https://qxa.me/api/url/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"url": "https:\/\/google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/url/add"
payload = {
"url": "https://google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https://www.mozilla.org/media/protocol/img/logos/firefox/browser/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https://apps.apple.com/us/app/google/id284815942",
"google": "https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https://google.ca"
},
{
"location": "United States",
"link": "https://google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https://google.com"
},
{
"device": "Android",
"link": "https://google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https://google.com"
},
{
"language": "fr",
"link": "https://google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("POST", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Post, "https://qxa.me/api/url/add");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"url": "https:\/\/google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"shorturl": "https:\/\/qxa.me\/google"
}https://qxa.me/api/url/:id/update
To update a link, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
| المعلمة | وصف |
|---|---|
| url | (required) Long URL to shorten. |
| custom | (optional) Custom alias instead of random alias. |
| type | (optional) Redirection type [direct, frame, splash] |
| password | (optional) Password protection |
| domain | (optional) Custom Domain |
| expiry | (optional) Expiration for the link example 2021-09-28 23:11:16 |
| geotarget | (optional) Geo targeting data |
| devicetarget | (optional) Device targeting data |
| languagetarget | (optional) Language targeting data |
| metatitle | (optional) Meta title |
| metadescription | (optional) Meta description |
| metaimage | (optional) Link to a jpg or png image |
| pixels | (optional) Array of pixel ids |
| channel | (optional) Channel ID |
| campaign | (optional) Campaign ID |
| deeplink | (optional) Object containing app store links. When using this, it is important to set device targeting as well. |
curl --location --request PUT 'https://qxa.me/api/url/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}'$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/url/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
CURLOPT_POSTFIELDS =>
'{
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://qxa.me/api/url/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/url/:id/update"
payload = {
"url": "https://google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https://apps.apple.com/us/app/google/id284815942",
"google": "https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https://google.ca"
},
{
"location": "United States",
"link": "https://google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https://google.com"
},
{
"device": "Android",
"link": "https://google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("PUT", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Put, "https://qxa.me/api/url/:id/update");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"id": 3,
"short": "https:\/\/qxa.me\/google"
}https://qxa.me/api/url/:id/delete
To delete a link, you need to send a DELETE request.
curl --location --request DELETE 'https://qxa.me/api/url/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://qxa.me/api/url/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => [
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
],
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://qxa.me/api/url/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});import requests
url = "https://qxa.me/api/url/:id/delete"
payload = {}
headers = {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
}
response = requests.request("DELETE", url, headers=headers, json=payload)
print(response.text)
var client = new HttpClient();
var request = new HttpRequestMessage(HttpMethod.Delete, "https://qxa.me/api/url/:id/delete");
request.Headers.Add("Authorization", "Bearer YOURAPIKEY");
var content = new StringContent("{}", System.Text.Encoding.UTF8, "application/json");
request.Content = content;
var response = await client.SendAsync(request);
response.EnsureSuccessStatusCode();
Console.WriteLine(await response.Content.ReadAsStringAsync());
{
"error": 0,
"message": "Link has been deleted successfully"
}